Steering Linkage Kit for VB, VC, VH, VK, VL, VN, VP, VR & VS Commodores
SKU: stlinkvbvs
The Commodore Steering Linkage Kit WILL Need to be installed by a Qualified Steering Specialist or a Mechanic
You WILL Need to Retain the Original Steering Rack End Drive and the Factory Upper Drive (Off the Steering Column)
Remove Factory Universals from Upper and Lower Drive Points and fit the New DD Universal to them
You WILL need to Clean up the Penned Over Section on the Factory Items to Remove the Universal Cup
Once new Universal is Fitted you WILL need to Peen the Ends to Ensure the Uni Doesn’t Fall Out
This step is very critical and should only be carried out by a professional!!
Please don’t attempt this job at home!
Refer to Images showing the Setup
The Commodore Steering Linkage Kit WILL Need to be installed by a Qualified Steering Specialist or a Mechanic
You WILL Need to Retain the Original Steering Rack End Drive and the Factory Upper Drive (Off the Steering Column)
Remove Factory Universals from Upper and Lower Drive Points and fit the New DD Universal to them
You WILL need to Clean up the Penned Over Section on the Factory Items to Remove the Universal Cup
Once new Universal is Fitted you WILL need to Peen the Ends to Ensure the Uni Doesn’t Fall Out
This step is very critical and should only be carried out by a professional!!
Please don’t attempt this job at home!
Refer to Images showing the Setup
The Commodore Steering Linkage Kit WILL Need to be installed by a Qualified Steering Specialist or a Mechanic
You WILL Need to Retain the Original Steering Rack End Drive and the Factory Upper Drive (Off the Steering Column)
Remove Factory Universals from Upper and Lower Drive Points and fit the New DD Universal to them
You WILL need to Clean up the Penned Over Section on the Factory Items to Remove the Universal Cup
Once new Universal is Fitted you WILL need to Peen the Ends to Ensure the Uni Doesn’t Fall Out
This step is very critical and should only be carried out by a professional!!
Please don’t attempt this job at home!
Refer to Images showing the Setup
SKU | stlinkvbvs |
Brand | Castlemaine Rod Shop |
Shipping Weight | 1.2000kg |
Shipping Width | 0.260m |
Shipping Height | 0.040m |
Shipping Length | 0.380m |
Shipping Cubic | 0.003952000m3 |
Be The First To Review This Product!
Help other Castlemaine Rod Shop users shop smarter by writing reviews for products you have purchased.
Others Also Bought

K Frame Spacers for LSA Engines in VB, VC, VH, VK, VL, VN, VP, VR & VS Commodores
$295.00
or 4 payments of $73.75 with
Info

K Frame Spacers for Small Block Chev Engines in VB, VC, VH, VK, VL, VN, VP, VR & VS Commodores
$245.00
or 4 payments of $61.25 with
Info

Pacemaker Extractors (Tri-Y & Competition) for VB, VC, VH & VK Holden's to Holden 5Ltr EFI Engines
$930.00
or 4 payments of $232.50 with
Info

Pacemaker Extractors (Tri-Y) for VB, VC, VH & VK Holden's to Holden 253 & 308 V8 Engines
$755.00
or 4 payments of $188.75 with
Info
More From This Category
![Universal Steering Shaft [9/16" Round to 3/4" DD (600mm Long)]](/assets/thumb/stshaftdd-b.jpg?20210505074501)
Universal Steering Shaft [9/16" Round to 3/4" DD (600mm Long)]
$75.00
or 4 payments of $18.75 with
Info
![Universal Steering Shaft [9/16" Round to 9/16" Round (600mm Long)]](https://cdn.neto.com.au/assets/neto-cdn/images/default_product.gif)
Universal Steering Shaft [9/16" Round to 9/16" Round (600mm Long)]
$35.00
or 4 payments of $8.75 with
Info

Steering Intermediate Shaft Kit for Castlemaine Rod Shop IFS Front Ends
From $350.00
or 4 payments of $87.50 with
Info