TE-TF CORTINA TO FORD V8 ENGINE CONVERSION KIT
TE-TF CORTINA TO FORD V8 MOUNT KIT
PLEASE STATE ENGINE AND TRANSMISSION THAT WILL BE USED AND IF THE CAR IS A 4CYL OR 6CYL BODY
2 off chassis reinforcement brackets
1 off gearbox crossmember
2 off engine mountings
1 off mounting plate for mount (earth strap adaptor)
Bolts, nuts, washers kit
if you selected FULL KIT the engine mount rubbers and trans mount are also supplied
THE LAST PHOTO SHOWS THE 6CYLINDER BODY CROSSMEMBER SET UP.
AS YOU CAN SEE IT ADAPTS TO THE FACTORY TE-TF CORTINA UNIT IS USED TO BOLT THE 6 CYLINDER BODY CROSSMEMBER IN TO THE CORRECT LOCATION USING A FORD TRANS RUBBER MOUNT.
if you have the 4 cylinder car it will be a total replacement of the factory crossmember.
TE-TF CORTINA TO FORD V8 MOUNT KIT
PLEASE STATE ENGINE AND TRANSMISSION THAT WILL BE USED AND IF THE CAR IS A 4CYL OR 6CYL BODY
2 off chassis reinforcement brackets
1 off gearbox crossmember
2 off engine mountings
1 off mounting plate for mount (earth strap adaptor)
Bolts, nuts, washers kit
if you selected FULL KIT the engine mount rubbers and trans mount are also supplied
THE LAST PHOTO SHOWS THE 6CYLINDER BODY CROSSMEMBER SET UP.
AS YOU CAN SEE IT ADAPTS TO THE FACTORY TE-TF CORTINA UNIT IS USED TO BOLT THE 6 CYLINDER BODY CROSSMEMBER IN TO THE CORRECT LOCATION USING A FORD TRANS RUBBER MOUNT.
if you have the 4 cylinder car it will be a total replacement of the factory crossmember.
| Part Type | ENGINE MOUNTS |
|---|