PH 5302 - Holden HG-HT with Chev Small Block. Manual & Automatic. TRI-Y Design.

Notes: If required with alt. bracket on LH side order PH 5303; Will fit slant plug heads; Will fit Powerglide automatic; Will fit Turbo 400 automatic if vehicles floor has been cut for correct fitment of automatic; Will not fit column automatic unless linkages are modified; Will fit with power steering; Will only fit with original engine mounting spacers or; PACEMAKER spacers Part number PEMP 307; Spacers must be fitted on correct side of vehicle (RH spacer is ¼" higher than LH spacer); PH5302 & PH5303 headers are designed to fit with a genuine factory starter when fitting to a 153 tooth (10 1/2") flex plate (auto only) or a 153 tooth (13") ring gear (manual only); PH5302 & PH5303 headers will not fit the genuine factory starter when fitting to 168 tooth (11") flex plate (auto only) or a 168 tooth (14") ring gear (manual only). Pacemaker recommends the use of an after market hi-torque starter. Please choose carefully as not all starter solenoids are in the same position.

Notes: If required with alt. bracket on LH side order PH 5303; Will fit slant plug heads; Will fit Powerglide automatic; Will fit Turbo 400 automatic if vehicles floor has been cut for correct fitment of automatic; Will not fit column automatic unless linkages are modified; Will fit with power steering; Will only fit with original engine mounting spacers or; PACEMAKER spacers Part number PEMP 307; Spacers must be fitted on correct side of vehicle (RH spacer is ¼" higher than LH spacer); PH5302 & PH5303 headers are designed to fit with a genuine factory starter when fitting to a 153 tooth (10 1/2") flex plate (auto only) or a 153 tooth (13") ring gear (manual only); PH5302 & PH5303 headers will not fit the genuine factory starter when fitting to 168 tooth (11") flex plate (auto only) or a 168 tooth (14") ring gear (manual only). Pacemaker recommends the use of an after market hi-torque starter. Please choose carefully as not all starter solenoids are in the same position.

Power Steering: No
Air Con: N/A
Oxy Sen: N/A
E.G.R: N/A
Y Branch: N/A
Gasket: DSF 9
Primary Pipe: 1 5/8" (41mm)
Secondary Pipe: 2" (51mm)
Outlet: 2 1/4" (57mm)
Fitting Time: 3 Hrs
SKU ph5303
Brand Pacemaker
Shipping Weight 10.0000kg

Be The First To Review This Product!

Help other Castlemaine Rod Shop users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category