Wilwood 1 1/8" Master Cylinder COFFIN TOP (Suit Booster ONLY)
Wilwood, the leading name in brake technology.
- Now manufacturing Quality Master Cylinders
- Dual outlets on either side of reservoir for ease of installation
- Dual circuit braking for safe operation
To ensure that the Master Cylinder will fit between your Booster and Shocker tower please measure before purchasing,
If you are running a remote booster then this will fit on the firewall with the booster relocated.
The 1-1/8” bore is designed for use primarily with power brake applications, either from vacuum assist or hydraulic assist systems. They’re designed for mount flanges from 3.22” to 3.40”, common measurements for most domestic cars and trucks from the mid 1960s to present, and offer fluid outlet ports on both sides of the bore. The stroke is set at 1.10” with a volume ratio of 2:1 between the primary and secondary chambers. Machined from high-pressure die castings, each master cylinder weighs only 3lbs, a 75% weight savings over most cast iron OE type master cylinders. We also offer a our combination proportioning valve kit, which includes brackets and stainless lines specifically for use with these master cylinders
|Part Type||DISC BRAKE CONVERSION|