Toyota 1JZ, 2JZ, 1UZ, 2UZ & 3UZ Adaptor Plate – Tremec T56 & TR6060 6 Speeds

This Adaptor Plate Kit the GM Tremec T56 or TR6060 6 speed gearbox to a Toyota 1UZ, 2UZ, 3UZ or Toyota 1JZ, 2JZ engine.

By simply using an auto bellhousing from the Toyota 1JZ, 2JZ, 1UZ, 2UZ or 3UZ the billet adaptor plate makes it easy to adapt the two together.

There are 3 options to this kit;

1. Adaptor Plate Only
   • Billet Adaptor
2. Spigot Bush
   • Billet Adaptor
   • Spigot Bush
3. Clutch Kit
   • Billet Adaptor
   • Spigot Bush
   • Billet Flywheel (Fitted with Dowels) – Ring Gear
   • Thrust Extension
   • Mantic Twin Plate Clutch Kit – (This clutch handles up to 1010ft lbs (1365nm) of torque drive capability)

We recommend the use of a concentric (hydraulic) slave cylinder to actuate the clutch.

NOTE: With this Kit you MUST user the standard Auto Bellhousing.

Ensure you choose the correct options below e.g. The Correct Engine Type.

If you are going to use a TR6060 please refer to the last pictures. This clutch kit will NOT work with the half spline input shaft, you MUST run the TR6060 with the full spline as shown in the last picture.