RB30 TO TURBO 350,T400, T700 OR V8 POWERGLIDE AP065 - GM AUTO - ADAPTOR PLATE

This conversion allows the fitting of a Chev Turbo 350/400/700 transmission to a NISSAN RB20 RB25 RB26 RB30 engine.

VERY IMPORTANT: Chev torque converters come in 2 bolt patterns.  

 One is on a bigger pitch circle diameter than the other this conversion only works on the SMALL diameter pattern, which is 10-3/4" PCD, NOT the 11-1/2" PCD.

The following original motor parts are used:

-Original starter motor

-Original sandwich plate (starter location plate)
-Original flex plate

Kit Contains:

1  off  Billet adaptor plate with dowels.

6  off  3/8"  UNC  x  1-1/2"  long  bolts  and  spring  washers

1  off  Torque convertor to flex plate adaptor ring. 

3  off  3/8" UNC x 1" long counter sunk head unbrakos

1  off  M10 x 1.5P x 50 long counter sunk head unbrakos

3  off  M10 x 1.5P x 40 long counter sunk head unbrakos

1  off  Crankshaft adaptor bung. 

4  off  M10 x 1.5 x 20 long bolts with flat and spring washer