CRS DROP AXLES

 

PLEASE READ

CRS is currently evaluating the viability of producing these stub axles due to the numbers required for production to commence vs the demand.

At this stage we have no indication from the owner as to when or if they will be come available again.

Watch this space and once we have a clear indication from the owner we will update this page immediately.

CRS have re-released the popular lowered drop axles after months of development.

Key features include:

> All drop axles are X-Rayed for Quality Assurance and exceed ISO9001

> Lifetime Guarantee for Original Purchaser

(Replaced if fail - excludes accident damage, bearing failure or modification of the stub)

> MONEY BACK GUARANTEE if not 100% satisfied within 14 Days!

 

APPLICATION BRAKES USED
 
SA02

HD to WB HOLDEN 2 INCH DROP

HQ - WB DISCS + CALIPERS
 SOLD OUT

 

 

  2” dropped axles to suit Holden balljoint front ends. Car ride height is reduced by 2” or 50mm while retaining the original spring length and bump stop clearance making them the best way to lower your car).

LOWRIDE STUB AXLE WILL LOWER CAR APPROXIMATELY:

HK-HT-HG-HQ-WB       50mm)      14” wheels          7.5 degrees

HD-HR                        60mm)      13” wheels        7.5 degrees

 

 

 

SA06

FORD XK-XF FORD 4 INCH DROP

 

HQ - WB DISCS + CALIPERS

  SOLD OUT

 

 

This conversion uses our SA02 stub axles and HQ-WB HOLDEN calipers.

Customer is required to send the following as a change over.

1 x pair of HT-HG HOLDEN Steering arms

We then supply the modified SA02 stub axles, modified HT-HG Steering  arms and fitting kit.

If you wish to retain Ford discs, the disc brake conversion kit below is required

THIS SET UP WILL REDUCE THE TOTAL TRACK BY 2.4mm OR 1.2mm PER SIDE

 

 

 

 

 

 

 

 

 

 

DB011 

HOLDEN HK-WB STUBS TO FORD XW-XB DISC CONVERSION  

 

 $218 

 

 

 

 

 

 

 

Were $990

SA18 HOLDEN RODEO TF 95-02 3 INCH DROP HOLDEN RODEO  SOLD OUT

 

 

Investment cast drop front stub axles to suit TF Holden Rodeo V6 models.

Standard steering remains unaltered and no alterations to wheel track.

Must use minimum of 16” wheels.