HD-HR HOLDEN 1965-1968

V8 CONVERSION PACKAGES

HOLDEN V8

FE02H

HR TYPE FRONT END MODIFIED AND STRENGTHENED

$645

TO SUIT HOLDEN V8

Although the mounts stay in the factory position in this conversion, the front end has been strengthened and has a cut out for sump clearance. Just buying engine mounts and rubbers is not going to allow you to do this conversion without the CRS modified front end.

EM089 

ENGINE MOUNTS FOR CRS MODIFIED HR FRONT END TO SUIT  

$225 

HOLDEN V8

EMR4

ENGINE MOUNT RUBBERS TO SUIT THE ABOVE 

$98

SUMP25

HOLDEN V8 to EARLY HOLDEN SUMP

$495

USES STANDARD HOLDEN PICK UP - NOT INCLUDED 

RP01KIT

FRONT MOUNT RACK AND PINION KIT TO SUIT HR FRONT END

$995

The front mount kit includes 

SHORTENED, MODIFIED, RECONDITIONED RACK

RACK MOUNTING NOLATHANE BUSHES

TIE ROD END ADAPTORS

WELD ON MOUNTING BRACKETS + GUSSETS

OUTRIGGER ACCESS PLATE

RESHAPED STEERING ARMS

WELD ON REPLACEMENT STABILISER BAR BRACKETS

CUSTOM STABILISER BAR PINS

WELD ON WISHBONE STRENGTHENING RODS

WELD ON FRONT CROSSMEMBER STRENGTHENING PLATE

If you send your lower control arms to us we can weld on the lower

control arm strengthening rods and stabiliser brackets for:

$150

THE PICTURE ABOVE SHOWS A HR FRONT END MODIFIED FOR EJ EH USE WHICH

HAS A DIFFERENT OUTRIGGER ATTACHED BUT IS THE SAME TYPE OF RACK SET UP.

THE HR OUTRIGGER WILL NEED TO BE CUT TO ALLOW THE RACK TO SIT IN PLACE.

LX LH TORANA RACK

HR STEERING ARMS

RP01MOUNTGKIT

RACK TO COLUMN LINK KIT - 2 UNI SET UP

 $443

Kit includes

STUNI02

TORANA UNIVERSAL JOINTS x 2

 $316

COTTERPIN

COTTERPINS TO SUIT x 4

 $92

STSHAFT01

STEERING SHAFT

 $35

SEE THE HD-HR OTHER ITEMS PAGE FOR