Ford early Sidevalve water pumps

One of our newest products is the reproduction water pump for 1932-1936 Ford Sidevalve engines. These pumps are a vast improvement on the original design and feature a sealed bearing, high quality impeller and aluminium housing. A boss is cast at the rear which can be drilled and tapped for water takeoff as shown right (double pully optional) in Rod's 32 Ford Roadster. These pumps also stopped overheating problems with this car.  Click to see larger pictures!

V6  & Straight 6 Holden Superchargers -
Cheap power!

Here is power at will, a clutch operated supercharger and fitting kit. The blower is clutch driven and engaged with a simple switch the same as air conditioners. Three and a half pounds of boost straight into the manifold. A 30% power increase is there when you want it, then just turn it off.

The kits include all necessary parts including the blower, mountings, intake and air cleaner, relief valve, manifold pulleys and belts. Go to our Superchargers page for more!

Ford Tie Rod Ends - '28-'48 Ford

New Polished Stainless Steel self lubricating Tie Rod Ends to suit 1928 - 1948 Ford. These are an all stainless steel forged body with no unsightly grease fitting and include stainless steel hardware. They can be adapted to fit Holden and other suspensions.

Now also available in mild steel.

EK Holden Couches

This Reproduction EK Holden Couch is just one of the many products available from the Rod Shop. These can be custom built to suit your application and can be purchased bare or with wooden seat inserts in many colours. They are on castors and look great in reception areas, lounge rooms, garages or even your verandah or porch!

The Rod Shop carries an enormous range of Accessories and Other Products from our EK Holden couch to our range of promotional products including a range of T-shirts. We also have novelty 'skull' stop lights, 'skull' gearstick handles, alternator brackets, floor boots, Hot Rod headlight brackets, Finned diff housing covers & bottom plates,  Wiper Motor kits, custom cables, in fact almost anything you could need to finish your vehicle.

As a major supplier of engine and driveline conversion kits there are numerous accessories that are required once a transplant is undertaken and CRS can supply many of these items such as alternator mounts, speedo cables of any combination, angle speedo drives, T piece drives so that Speedo’s and sensors can be driven, Corrector boxes to make speed and distance read correctly. We also have a new electronic converter to retain your original mechanical speedo when using transmissions with electronic speedo drive.

A large number of engine mounts are fabricated and stocked by CRS, sumps and oil pickups are built or modified to requirements. A full printed catalogue is available for $10 (plus postage) For further information or if you cannot find what you want please contact us.